I replaced the 3 spark plugs on my Cappuccino, pretty easy process. I’d recommend doing just 1 at a time, so that you can’t mess up which spark plug wire to use.

Parts Required

• Spark Plugs, NGK 6046 DCPR7EIX x3
• 5/8” Spark Plug deep socket

I had to take off 1 hose above the spark plugs, using needle nose pliers. Mine did not have a cover over the spark plugs, but they came with one stock.

Then just remove the spark plug wire, remove the old spark plug with a 5/8” deep socket, then replace with your new spark plug and give it a half turn to tighten. I bought pre-gapped spark plugs, so no gapping needed. The last spark plug was difficult for me to get out, I ended up having to spray some PB Blaster in there (a common theme with this car…), then let it sit for a bit before removing it. It was way over tightened.