Lexus GX470 - Tinting the Fog Lights

Fog Lights

I yellow tinted my fog lights on the GX, it was pretty simple. Here’s how to do it.

Fog Lights

Take your fog lights off the car. This is a 10mm bolt behind each light, which can be reached easily just by laying under the front bumper.

Fog Lights

Take the fogs to your work station. Clean the housing really well. Get out your tint, I used this yellow tint from Amazon.

Spray some water from a spray bottle on the lights, then apply the film, sticky side touching the lights. Spray some more water on the outside of the film, then squeegee the water out, using the included tool or a credit card, or similar.

Finish getting all the water out, then use a hair dryer on VERY HOT to get the edges. Use scissors or a utility knife to cut the ends to look seamless.

Fog Lights

Reinstall back on the GX!

Fog Lights

Written on October 25, 2019

Other Posts

E-Z-GO TXT Golf Cart - Safety Grab Bar and Triangle Install | cars | August 27, 2023

Ferrari 360 - Catalytic ECU Replacement | cars | July 30, 2023

Building the Costo Northport Shed | renovations | July 25, 2023

Lexus GX470 - Updated RAM Phone Mount | cars | May 30, 2023

Ferrari 360 Spider - Replace Clock Light | cars | May 17, 2023